Ever wondered how much a 3 sutar, 4 sutar, or 6 sutar steel bar actually weighs? Whether you’re constructing a house, estimating reinforcement steel for a concrete slab, or comparing supplier quotations, knowing the correct saria weight chart can save you from costly calculation mistakes. In Pakistan, steel reinforcement bars are commonly identified by their sutar sizes, but their weight is calculated using diameter, length, and steel density.
A small difference in bar diameter can significantly change the total weight of your steel order. That’s why understanding saria weight per foot, kilograms per meter, and total bar weight is essential for accurate construction planning.
In this guide, you’ll find easy-to-read weight charts for common saria sizes, practical calculation formulas, and simple examples to help you estimate reinforcement steel requirements with confidence.
Saria Weight Chart: KG Per Foot, Meter and 40-Foot Bar
The following saria weight chart shows the approximate theoretical weight of common reinforcement steel sizes used in Pakistan. These calculations use nominal metric diameters and a steel density of approximately 7,850 kg/m³.
| Saria size | Diameter | KG per foot | KG per meter | KG per 40 ft bar |
| 3 Sutar | 10 mm | 0.188 | 0.617 | 7.53 |
| 4 Sutar | 12 mm | 0.271 | 0.889 | 10.84 |
| 5 Sutar | 16 mm | 0.482 | 1.580 | 19.27 |
| 6 Sutar | 20 mm | 0.752 | 2.469 | 30.10 |
| 7 Sutar* | 22 mm | 0.910 | 2.988 | 36.43 |
| 8 Sutar | 25 mm | 1.175 | 3.858 | 47.04 |
*7 sutar is shown as an approximate trade-size reference. All weights are theoretical, rounded estimates for the stated metric diameters. A 40 ft bar is 12.192 meters. Actual nominal weights can differ under the applicable manufacturing standard.
For example, a 12 mm steel bar weighs approximately 0.271 kg per foot, while a 20 mm bar weighs approximately 0.752 kg per foot. This difference becomes substantial when hundreds of bars are needed for a construction project.
Kohsar Steel Industries also publishes ASTM bar specifications with nominal weights for standard rebar designations. Those values should be used when the project specifically requires ASTM-designated reinforcement.
Sutar to MM Conversion: Understanding Steel Bar Sizes
In Pakistan, contractors and steel dealers frequently use the word sutar when referring to reinforcement bar sizes. However, sutar is a traditional size designation, not a measurement of bar weight.
In common market terminology, sutar sizes correspond approximately to fractional-inch bar diameters.
| Local name | Fractional inch | Approximate inch conversion | Common metric size |
| 3 Sutar | 3/8 inch | 9.525 mm | 10 mm |
| 4 Sutar | 1/2 inch | 12.700 mm | 12 mm |
| 5 Sutar | 5/8 inch | 15.875 mm | 16 mm |
| 6 Sutar | 3/4 inch | 19.050 mm | 20 mm |
| 8 Sutar | 1 inch | 25.400 mm | 25 mm |
The exact inch conversions and the commonly used metric trade sizes are not identical. For instance, 3/8 inch is exactly 9.525 mm, whereas 10 mm is the commonly quoted metric size.
For more information about bar diameters and how they relate to construction applications, read Kohsar Steel Industries’ guide to different diameters of steel bars.
How to Calculate Saria Weight Using the Steel Bar Weight Formula
You don’t always need a chart to determine how much reinforcement steel weighs. With the right formula, you can estimate the weight of almost any standard round steel bar.
Steel Bar Weight Formula
The commonly used theoretical steel bar weight formula is:
WEIGHT PER METER
W=D2162
W = weight in kg/m | D = nominal diameter in mm
This simplified formula is based on the cross-sectional area of a round steel bar and the approximate density of steel.
For the total bar weight, multiply the weight per meter by the bar length in meters.
Example: Calculate the Weight of a 12 mm Saria Bar
Suppose you’re purchasing a 12 mm bar with a length of 12 meters.
Step 1: Square the diameter.
12 × 12 = 144
Step 2: Divide by 162.
144 ÷ 162 = 0.889 kg per meter
Step 3: Multiply by the total length.
0.889 × 12 = approximately 10.67 kg
Therefore, a 12-meter-long, 12 mm reinforcement bar has an estimated theoretical weight of 10.67 kg.
If you purchase 100 such bars, their combined theoretical weight would be approximately 1,067 kg.
This method is useful for estimating quantities before ordering steel, although final purchasing weights should be verified against the relevant product specifications.
3 Sutar vs 4 Sutar Saria Weight: How Much Is the Difference?
Two commonly discussed reinforcement sizes in Pakistan are 3 sutar and 4 sutar. Although their diameters differ by only a few millimeters, their weights are noticeably different.
3 Sutar Saria Weight
A 3 sutar bar is commonly associated with a nominal diameter of 10 mm.
Its approximate theoretical weight is:
- Per foot: 0.188 kg
- Per meter: 0.617 kg
- Per 40-foot bar: 7.53 kg
For an order of 50 bars, each measuring 40 feet, the estimated total weight is approximately 376.3 kg.
4 Sutar Saria Weight
A 4 sutar bar is commonly associated with a nominal diameter of 12 mm.
Its approximate theoretical weight is:
- Per foot: 0.271 kg
- Per meter: 0.889 kg
- Per 40-foot bar: 10.84 kg
An order of 50 bars, each measuring 40 feet, would weigh approximately 541.9 kg.
That means 50 bars of 4 sutar steel weigh approximately 165.6 kg more than the same number of 3 sutar bars.
The difference demonstrates why diameter is important when estimating reinforcement quantities. However, the correct size must always follow the approved structural design rather than being selected on weight alone.
How to Estimate Total Steel Weight for a Construction Project
Imagine your construction plan specifies the following reinforcement quantities:
| Bar diameter | Quantity | Length per bar | Estimated weight |
| 10 mm | 100 bars | 40 ft | 752.6 kg |
| 12 mm | 80 bars | 40 ft | 866.8 kg |
| 16 mm | 50 bars | 40 ft | 963.3 kg |
| Total | 230 bars | 2,582.7 kg |
In this example, the total theoretical steel requirement is approximately 2.58 metric tonnes.
This calculation can help contractors prepare preliminary material budgets and compare supplier quotations.
However, it does not include cutting waste, lap lengths, bends, hooks, or other reinforcement detailing requirements. Those quantities should be calculated from the approved bar bending schedule.
Does Actual Saria Weight Always Match the Weight Chart?
Not exactly. A theoretical saria weight chart provides a useful estimate, but actual bar weights can vary according to nominal dimensions, manufacturing tolerances, product specifications, and the applicable standard.
For example, an ASTM No. 4 reinforcement bar has a nominal diameter of approximately 12.7 mm, whereas the simplified 12 mm metric calculation uses a smaller nominal diameter. Their theoretical weights are therefore different.
Kohsar Steel Industries publishes nominal bar weights and dimensional information for ASTM A615 and A706 reinforcement bars on its ASTM steel standards and specifications page.
When checking a steel delivery, buyers should compare the supplied material against the specified grade, nominal size, length, and applicable standard rather than relying only on a generic weight chart.
Conclusion
An accurate saria weight chart makes construction planning easier by helping you estimate steel quantities, compare bar sizes, and understand how much reinforcement material your project requires.
Whether you’re calculating 3 sutar saria weight, converting kilograms per meter into weight per foot, or estimating an entire steel order, the right measurements can help reduce purchasing errors.
At Kohsar Steel Industries, we manufacture Grade 40 and Grade 60 reinforcement bars for different construction requirements. Our team can help you understand available bar specifications and obtain a quotation based on your project’s requirements.
Need reinforcement steel for your next project? Contact Kohsar Steel Industries to confirm available sizes, specifications, and supply options before placing your order.
FAQs
Q 1. Saria ka weight kitna hota hai?
Ans: Saria ka weight uske diameter aur length par depend karta hai. For example, a 10 mm bar weighs approximately 0.617 kg per meter, while a 16 mm bar weighs approximately 1.580 kg per meter, based on the simplified theoretical formula.
Q 2. 3 sutar saria ka wazan kitna hota hai?
Ans: 3 sutar saria ka wazan taqreeban 0.188 kg per foot hota hai. A 40-foot-long, nominal 10 mm steel bar weighs approximately 7.53 kg.
Q 3. 4 sutar ka wazan kitna hota hai?
Ans: 4 sutar saria ka wazan taqreeban 0.271 kg per foot hota hai. A 40-foot-long, nominal 12 mm bar weighs approximately 10.84 kg.
Q 4. How do you calculate rebar weight per meter?
Ans: Use the formula D² ÷ 162, where D represents the nominal diameter in millimeters. For example, a 20 mm bar weighs approximately 400 ÷ 162 = 2.469 kg per meter.
Q 5. What is the weight of a 16 mm saria bar?
Ans: A nominal 16 mm steel bar weighs approximately 1.580 kg per meter, 0.482 kg per foot, and 19.27 kg for a 40-foot length.
Q 6. Is sutar the same as steel bar weight?
Ans: No. Sutar refers to a commonly used bar size designation, while weight is measured in kilograms or metric tonnes. The weight depends on both diameter and length.





